Great for any business owners and home use
Plumbed In
Ice Makers
Considerations when choosing
an ice maker
It is important to purchase an ice maker that can cope with SA temperatures i.e. 32 degree Ambient. A lot of available ice makers have been designed to cope with European conditions i.e. based on a 24 degree ambient temperature. This will cause a lower production or even no production of ice in high external temperatures.
PLUMBED IN ICE MAKERS
FEATURES
- Makes Gourmet ice blocks
- Front ventilating
- Stainless steel
- Embraco Compressor
- Replaceable nozzles
- Easy maintenance with replaceable nozzles
- Gravity fed drain reduces moving parts
- Spray system gives a clear, solid ice block
- Front discharging so can be built in
- Recommended that filtration system be installed to help protect the “spray” function
- Unit is front discharging
- This is a gravity fed drain, thus drain point must be lower than unit
- New models will have on/off switch
SM26S
Ice Maker
SIZE
380 W x 530 D x 640 H
WATT
400
CAPACITY
26kg per 24hr
CUBES PER CYCLE
30 @ 45 min
PLUMBED IN ICE MAKERS
COMMERCIAL AND INDUSTRIAL
SM50 Ice Maker
SIZE
495 W x 610 D x 830 H
WATT
400
CAPACITY
52kg per 24hr
CUBES PER CYCLE
32 @ 25 min
FEATURES
- Bullet type
- Stainless steel finish
- Stainless Steel water inlet valve
- Water agitator
- Water recycling Function
- Ice Bin Storage Mat
- ON/OFF switch
- Inlet valve can handle higher pressures
- Water agitator reduces air in the water to produce clearer, harder ice
- 90% of the water is recycled through the system to reduce water waste
- Storage bin Mat protects the bin lining from damage that might be caused when “scooping” ice
- These units have a gravity fed drain point, thus drain point must be lower than the machine
- Keep unit well ventilated
FEATURES
- Makes Gourmet ice
- Front ventilating
- Stainless steel
- Embraco Compressor
- Replaceable nozzles
- Easy maintenance with replaceable nozzles
- Gravity fed drain reduces moving parts
- Spray system gives a clear, solid ice block
- Front discharging so can be built in
- Recommended that filtration system be installed to help protect the “spray” function
- Unit is front discharging
- New models will have on/off switch
SM80
Ice Maker
SIZE
730 W x 600 D x 1015 H
WATT
680
CAPACITY
80kg per 24hr
CUBES PER CYCLE
39 @ 45 min
PLUMBED IN ICE MAKERS
COMMERCIAL AND INDUSTRIAL
SM150 Ice Maker
SIZE
760 W x 610 D x 560 H
WATT
900
CAPACITY
150kg per 24 hr
CUBES PER CYCLE
180 @ 25 min
FEATURES
- Stainless Steel
- Refrigerant R404
- Climate Class ST Type
- Capacity at 10 degree water, 20 degree Ambient
- Air filter for condenser
- 120kg storage bin
- 220volt
- Ice full sensor
- Square block ice
- Copeland Condenser filter improves the efficiency of the unit
- Ensure that unit is installed in a well-ventilated environment
- Maximum ambient temperature of 38⁰C
- Clean condenser filter regularly
FEATURES
- Stainless Steel
- Refrigerant R404
- Climate Class ST Type
- Capacity at 10 degree water, 20 degree Ambient
- Air filter for condenser
- 120kg storage bin
- 220volt
- Ice full sensor
- Square block ice
- Copeland Condenser filter improves the efficiency of the unit
- Ensure that unit is installed in a well-ventilated environment
- Maximum ambient temperature of 38⁰C
- Clean condenser filter regularly
SM250
Ice Maker
SIZE
760 W x 600 D x 560 H
WATT
1200
CAPACITY
250kg per 24hr
CUBES PER CYCLE
240 @ 25 min
PLUMBED IN ICE MAKERS
COMMERCIAL AND INDUSTRIAL
SM450 Ice Maker
SIZE
760 W x 600 D x 720 H
WATT
2400
CAPACITY
450kg per 24hr
CUBES PER CYCLE
380 @ 25 min
FEATURES
- Stainless Steel
- Refrigerant R404
- Climate Class ST Type
- Capacity at 10 degree water, 20 degree Ambient
- Air filter for condenser
- 120kg storage bin
- 220volt
- Ice full sensor
- Square block ice
- Copeland Condenser filter improves the efficiency of the unit
- Ensure that unit is installed in a well-ventilated environment
- Maximum ambient temperature of 38⁰C
- Clean condenser filter regularly
Considerations
It is important to purchase an ice maker that can cope with SA temperatures i.e. 32 degree Ambient. A lot of available ice makers have been designed to cope with European conditions i.e. based on a 24 degree ambient temperature. This will cause a lower production or even no production of ice in high external temperatures.
